Aalborg TIO Totalizer I/O Flow Monitor/Controller Manual de usuario descargar pdf (Pagina 86)

COMMAND

NAME

DESCRIPTION

NO.

COMMAND SYNTAX

COMMAND ARGUMENT 1

ARGUMENT 2

ARGUMENT 3

ARGUMENT 4

RESPONSE

Pulse

Output

Sets and controls action of the

programmable Pulse Output

circuitry.

NOTE:

Unit/Pulse value must be

entered in currently selected

EU.

EU must not be time based.

It is recommended to set the

unit/pulse value equal to the

maximum flow in the same

units per second. This will limit

the pulse to be no faster than

one pulse every second.

Example:

Maximum flow rate: 600

liter/min (600 liter/min = 10

liters per second)

If Unit/Pulse is set to 10 liters

per pulse, the output will pulse

once every second (F=1 Hz).

Pulse active time in ms must

be at least twice less than

pulse period (1/F).

P U

Set Units Per

Pulse

Parameter.

<Value>

(Unit/Pulse)

In current E.U.

(example:

10 litr/pulse)

PU:<value>

Example:

PU:10

Set Pulse active

Time in ms

<value>

[10 -6553 ms]

PT:<value>

Example: PT:100

(disable pulse

output)*

P:D

(enable pulse

output)

P:E

Q (read

current pulse out-

put Queue value)

PQ:<value>

(number of pulses in

Queue)

Set Flow Start

value

<value>

(0.0–100.0%FS)

PF:1.0

(read setting

status)

PS:Mode,FlowStart,

Unit/Pulse,PulseTime

Interval

Example:

PS:E,1.0,1.666,100

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 97 98

Comentarios a estos manuales

Sin comentarios

Aalborg TIO Totalizer I/O Flow Monitor/Controller Manual de usuario Pagina 86

Comentarios a estos manuales

Relacionado con productos y manuales para Relé Aalborg TIO Totalizer I/O Flow Monitor/Controller